Labelling High Points and Low points

Hi,

I have received a series of road design in Microstation and associated profiles. I need the high and Low points to carry out the drainage design. Currently, I am going to the profile each time searching for high points and low points and then going back to the road centreline to place a marker and text (manually) of these locations.

Is there a way I can get Microstation to automatically display the high and low points on the road centreline (i.e. changes in the vertical alignment - not just the single highest point and single lowest point on the profile). I've done this before in Civil3D but can't seem to figure out how to do it in Microstation.

Thanks,

Colm.

Parents Reply
  • since you have a  profile, then presumably you have access to the 3d model suface, if you also have 3d designed contours you can use one of the display attributes to produce a thematic map of the contours like an isopach...but your inroads designer can also produce this better.. but i just wanted  to pipe in there that vanilla mstn can do it  if the data is available..

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Children
No Data