v8i SS10 and application support

I'd be interested in an "InRoads SS2"-SS10. I'm sure I'm not alone...

After I asked we received an email stating the following.

The Civil Products (GEOPAK SS4 / InRoads SS4 – Power or Layered) that will run with MicroStation V8i SS10 should be out within the next few weeks.

Please do not upgrade to the V8i SELECTseries 10 if you are running GEOPAK SS2 or InRoads SS2 in production.  This upgrade will only be applicable if you are running GEOPAK/InRoads SS4 in production.   The benefit of upgrading is that you will be able to extend the support life on those versions of software.

After I asked we received an email stating the following.

The Civil Products (GEOPAK SS4 / InRoads SS4 – Power or Layered) that will run with MicroStation V8i SS10 should be out within the next few weeks.

Please do not upgrade to the V8i SELECTseries 10 if you are running GEOPAK SS2 or InRoads SS2 in production.  This upgrade will only be applicable if you are running GEOPAK/InRoads SS4 in production.   The benefit of upgrading is that you will be able to extend the support life on those versions of software.

Well, that clears it up - thanks!

Powercivil?

But it kinda doesn't answer if SS2 will be able to run, does it?

MaryB, it does run but we are having an annoying issue with this:

It pops up frequently the first time you run a command in InRoads SS2.  It takes 20-30 seconds but eventually goes away and the commands work fine.

I'm not having that problem yet.

I'm just trying to find out what the drop dead date will be for the SS2 licensing. At what point does that cease to function?