Using 'place note' to place text with a box around the text. The note places correctly but then after clicking the next command, the box rotates 45 degrees. The text does not rotate, nor does the leader... just the box. What is causing this to occur? Using Connect 10.1200.40
Lance Kitchens said:The note places correctly but then after clicking the next command, the box rotates 45
Can you post a small DGN file with a model that exhibits your problem?
Regards, Jon Summers LA Solutions
File can be found here
www.dropbox.com/.../TEXT BOX ROTATING.dgn
Experiencing the same problem with Aecosim Connect Edition Update 4. In a 2D Design Model when a Leader with Text Frame = Box is placed in an unrotated view it appears as you would expect it to, but when placed in a rotated view it seems the 'Text Frame' takes on the property of 'Rotated Box' - This also happens when the note is edited.
I believe Defect # 996507 which was previously raised addresses this issue. It appears to be fixed in Update 13 which is due for release very soon.
RegardsAndrew BellTechnical SupportBentley Systems
Andrew - can you verify if the text frame rotation has been corrected in release 13. We are on release 12 and are experiencing the problem which is causing major headaches. I work for the Army Corps of Engineers and we cannot just grab the latest release, it has to go through a check and approval process, but I can request that 13 be approved since it is available now.
I have noticed that this is almost random..I can't pinpoint when the text frame rotation will happen nor in what context it happens, but it's always after the first note placement for us. And the frame rotates on notes if they are moved or copied....
Michael Brennan, P.E.