I am using MicroStation v8i SS2.
I am referencing an AutoCAD file into my dgn file, and have set the layers in AutoCAD to be all "color-by-layer". When I reference into MicroStation, select Merge to Master in reference dialog, all my layers and colors reset to "Default" and a white color. If I set all my layers in AutoCAD as color by object, instead of "by layer", then I retain my colors from AutoCAD when Merge to Master, but the layers still revert to the Default level in MicroStation. Is there a way to preserve my layers and colors from AutoCAD?
Colours are going to be hard unless you're using the same colour table.
Levels should come through unless you've locked level creation in the configs.
Are you able to check the config settings you have?
You're looking for something like:
_USTN_CAPABILITY < -CAPABILITY_LEVELS_ALLOW_CREATE
This locks level creation and will move new levels not set in a dgnlib file to the default level.
Answer Verified By: CADTech1
Thanks for that feedback. Changing the config is not likely since I am working with a local DOT workspace and configuration settings.
The only other option is to convert the autocad files to dgn and set up a mapping file that maps the layers to DOT levels.
Is the mapping file created in MicroStation or AutoCAD? Do you have a white paper on how to do that?
It's created in MicroStation. If you go to:
in the Save-As dialog change the output to dgn and then click Options. You'll then see a Remap tab. Click on this and you'll see it uses a csv file. You can open and edit from the dialog or take a copy, edit it and then open it from the dialog when you're ready.
You should find some good info on it in the help file.