Is there a way to add perpendicular as an option in mult-snap? I included a picture of what is available on my install.
Microstation Version: V8i (Select Series 4) 08.11.09.832
Lucas Richards said:Is there a way to add perpendicular as an option in mult-snap?
Unfortunately not, the list of supported snap modes is hard coded in MicroStation.
The limited amount of available snap modes in multisnap has been discussed several times (try search this forum), but I am not sure whether it leads to any defect number or plans to enhance it. In MicroStation CE, the options are still the same :-(
Labyrinth Technology | dev.notes() | cad.point
if your using accudraw then you could create a custom key that alias's they perp snap or edit the P to perp snap (instead of point keyin)... not what you wanted as you like the multisnap...
I use default key point and keyin with accudraw
I or C for Intersect or C for centre. and if I edited the P to perpendicular snap it would work too...
also my default for the KY is KY = 2
Currently Using V8iss10
MicroStation user since 1990 Melbourne Australia.click link to PM me
Enhancement # 85484 was previously raised to add this capability.
"User would like to add perpendicular snap to the multi snap list via Settings > Snaps > Multi Snaps"
If you wanted to be linked for notifications you would need to raise a new Service Request.
RegardsAndrew BellTechnical SupportBentley Systems