r13 Early Impressions

Just installed this morning. Hating the raster file handling, it's worse. I just attached several, they don't display until a manipulation like level on/off, ras display is used.

Then a little text editing, once you complete a single edit text command reverts to Default Tool. Single Click set to Locked in preferences.

We're just getting started with this dog, guess I'll go back to keeping a list and filing service tickets when I have time.

Anyone else feel like an unpaid beta tester?

Also crashed once today, just shut down, no error, no nothin.

Parents
  • Hi Bob,

    Thanks for reporting this to community. Will you please share few raster file which you are using? So that we can reproduce this on our end and fix the issue. Providing DGN, Snapshot, video will also work. Thanks again.

    ~ASN

       

  • I just tried to simulate and record a video, and of course it worked just fine. I'm too busy right now. Plus I've been through this process many times, I get blown off 9 out of 10 times. I'll get back to this and my other bugs when I have time. I will submit well documented service tickets.

    Thanks for the attention!

    Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley

  • I've got zero issues with speed. Does seem to be more crashing, mostly with existing projects. However, I'm finding lots of poor functionality. I'm keeping a list and will file a multitude of Service Requests her soon.

    Notes: (any comments welcome)

    Edit text is permanent single shot.

     

    With tool boxes docked on screen edge, using one of those tools sends focus to 2nd monitor.

     

    After file compress, rasters go away and some level functions no longer work.

     

    Cntrl.P no longer prints

     

    Certain DXFs, attached as reference, for some reason they come in 1:1, that’s nice, but Save Settings close, open, Microstation forgets the scale and reverts to 1:3.280333. Some DXFs just attach 1:3.2803 or 12:1, once corrected setting retains.

     

    Still will not correctly position geo-referenced PDFs

     

    When selecting level from TN ribbon, active level selector, last level is cut off, scrolling pages can skip one from page to page.

     

    Modify command, key-in or from ribbon- If Tool Settings box is open when command is initiated, modifying a rectangle, grab one corner, Orthogonal button is not available. With TS close Ortho button is there. Workaround is to turn off Enable Smartline modification.

    Just getting started.................

    Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley

Reply
  • I've got zero issues with speed. Does seem to be more crashing, mostly with existing projects. However, I'm finding lots of poor functionality. I'm keeping a list and will file a multitude of Service Requests her soon.

    Notes: (any comments welcome)

    Edit text is permanent single shot.

     

    With tool boxes docked on screen edge, using one of those tools sends focus to 2nd monitor.

     

    After file compress, rasters go away and some level functions no longer work.

     

    Cntrl.P no longer prints

     

    Certain DXFs, attached as reference, for some reason they come in 1:1, that’s nice, but Save Settings close, open, Microstation forgets the scale and reverts to 1:3.280333. Some DXFs just attach 1:3.2803 or 12:1, once corrected setting retains.

     

    Still will not correctly position geo-referenced PDFs

     

    When selecting level from TN ribbon, active level selector, last level is cut off, scrolling pages can skip one from page to page.

     

    Modify command, key-in or from ribbon- If Tool Settings box is open when command is initiated, modifying a rectangle, grab one corner, Orthogonal button is not available. With TS close Ortho button is there. Workaround is to turn off Enable Smartline modification.

    Just getting started.................

    Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley

Children
  • Thanks Bob for electric quick reply.

    I am able to reproduce couple of issues you mentioned above. I am working on remaining issues. Will you please help us with the following?

    Issue 1: Edit text is permanent single shot.

    Created following defect 1050394.

    Issue 2: With tool boxes docked on screen edge, using one of those tools sends focus to 2nd monitor.

    Will you please share screen shot or tool which you are using? I am not able to reproduce the issue.

    Issue 3: After file compress, rasters go away and some level functions no longer work.

    Will you please provide Raster and DGN files? I am not able to reproduce the issue with my dataset.

    Issue 4: Cntrl.P no longer prints

    This is working fine in MSTN. It opens Print dialog box.

    Issue 5: Certain DXFs, attached as reference, for some reason they come in 1:1, that’s nice, but Save Settings close, open, Microstation forgets the scale and reverts to 1:3.280333. Some DXFs just attach 1:3.2803 or 12:1, once corrected setting retains.

    Will you please provide DXF file?

    Issue 6: Still will not correctly position geo-referenced PDFs

    Will you please provide geo-referenced PDF file?

    Issue 7: When selecting level from TN ribbon, active level selector, last level is cut off, scrolling pages can skip one from page to page.

    I am able to reproduce the issue and following defect is reported to track the issue. D1050989

    Issue 8: Modify command, key-in or from ribbon- If Tool Settings box is open when command is initiated, modifying a rectangle, grab one corner, Orthogonal button is not available. With TS close Ortho button is there. Workaround is to turn off Enable Smartline modification.

    I am investigating this issue.

    Thanks

    ~ASN

       

  • Thanks Ajay. I may have some time in a day or so. Please post up the link for me to upload, the rasters are ridiculously large. I have been down this road before.

    Bug 2: Any tool box. I have explorer, tool settings and models docked on the left, ras manager, reference, level man, level display docked on the right

    Bug 5:GIS.dxf

    Bug 4: Might be a Windows thing, just did a major update, perhaps it will just go away

    Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley

  • Thanks Bob,

    I will provide you the link soon.

    ~ASN

       

  • Hi Bob,

    Will you please upload files to the link which Carl provided in the mail thread?

    Thanks

    ~ASN

       

  • Done

    Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley