Level Number Map

Question

Remember the old level number map. Microstation got rid of it quite awhile ago. Now that I finally upgraded to Connect...has anybody written anything so I can get it back?

Andrew Bell · Accepted Answer

As has already been explained here by a number of people this concept of the old level number map containing the limited 64 levels was something that was replaced with the Level Display dialog. This is due to the major change in operation between V7 and V8 DGN file format where the amount of levels that can be defined in a file are now virtually unlimited. The concept of the numbers against each level is also a concept that only really remains as a legacy workflow due to these old concepts. I would suggest having a closer look at the operations of the Level Display dialog as it should not be too much of a difference to turn levels on and off like you did before. As you stated the Level Name you have in your design file are still the numbers so you can just a click on each of these levels to turn them on or off. 
 https://docs.bentley.com/LiveContent/web/MicroStation%20Help-v15/en/LevelDisplay.html

Level Number Map

Top Replies