Few days ago already, I cannot edit the attached reference of my dgn file. dialog will not appear and will result to stopping or hanging of my microstation window. please help. thank you
This issue is most likely associated with a dialog box that has been dragged off the edge of the screen. The easiest method of retrieving the dialog box would be to locate it under the Window List in MicroStation. You can open this by keying it into the Search Ribbon option or selecting the Windows List tool from the Primary ribbon.
If the missing dialog is not listed, you may need to reset MicroStation back to the default settings. To do this key-in the following at a command prompt:
"C:\Program Files\Bentley\MicroStation CONNECT Edition\MicroStation\microstation.exe" -restoredefaults
(or whichever location has been selected for the installation of MicroStation)
This should reset everything back to default so the dialog boxes reappear.
You can open a Command Prompt either from:
> Start Menu > All Programs > Accessories
> Start Menu > Run...
If you require further assistance do not hesitate in contacting us.
RegardsAndrew BellTechnical SupportBentley Systems
thank you for the reply but still nothing changed,
Something else you can try is to change the resolution of your monitors to something like 600x800. If the dialog is off the screen you should be able to find it and then drag it back into the Microstation window.
If it is not there you .upf file may be corrupted. Delete the .upf and allow Microstation to create a new one.
Microstation CONNECT 10.16.01.56
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
This trick worked perfectly for me. The reference box popped right back up as soon as I switched the resolution back to the original setting.
Yes, the same helped me as well.
Thanks for mentioning here.
For Bentley products, I don't expect this kind of software problem.