Selection area color in Microstation CONNECT

Question

Hello all! 
 Comrades, do you know how can we change the selection area color? For example in AutoCAD if we click on drawing and go to the left green area appears (and if we go to the right after clicking the blue one appears).

Lorys · Answer

if you just want to make a specific colour for any selection ie crossing or inside you can go to 
 preferences (personal) > view options now by default selection set is set to magenta and so is element hilite. 
 if you double click on the selection set colour an override box pops and you can change the colour via the rgb so green would be 0,255,0 (R,G,B) 
 Then ok and your selection sets will always be green from now on.. to change hilite on the fly ( note hilite function is not the same as selection function) you can us a keyin to set almost any colour you want, see below 
 set hilite colourname 
 where colourname is say red, or blue etc you can even pull down in keyin dialog to see more colours just like we always have in previous versions 
 \ 
 and the result now when doing any selection my case is green 
 
 and if I was to use the power selector to select by a level , or element type or other options then that selection would be green.. 
 This is handy when you have a lot of magenta objects and don't want to use the same colour ie magenta as your selection colour.

Selection area color in Microstation CONNECT

Top Replies