After much of a struggle I managed to get a dot terminator.
This I achieved by copying a dim style and then editing the Geometry>Terminator>Symbols, I set both the arrow and dot symbols to character "n" in font 102. However the leader now passes though the terminator rather than stopping inside the terminator.
Any advice?
Are you using the Place Note tool? If so you can go into the dimension style and under the Text Tab select Terminator in the Notes field. The drop down will give you an open or closed dot option (along with several other terminator styles). If you need to adjust the size of the dot go to the Geometry Tab and under the Terminators field change the Height field to suit.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
Thanks mwlong.
Neville du Plessis
Rail Design