I have a three screen system as shown below.
When opening v8i, Microstation's Primary application window appears on Display 1 and the Secondary application window appears on Display 2. I prefer the second window to be on the right of my first so I drag and maximize it to Display 3. After doing a Save Settings, and re-opening, Microstation still returns to the Primary = Display 1 and Secondary = Display 2. How do I force Secondary to Display 2 every time I open Microstation?
In CONNECT, the situation is even worse - Primary opens on Display 2, and Secondary opens on Display 1.
Again, I want Primary on Display 1 and Secondary on Display 3 for both v8i and CONNECT.
Is there anything I can do to achieve this, or do I have to keep dragging Microstation windows around before I start to work?
v8i: 08.11.09.916
CONNECT: 10.14.00.109
Windows 10: 10.0.18363
Another go at this - is it not possible to tell Microstation which display to use in a multi-display system?
you want quick and dirty fix ?
Swap your cables around... ( when only had 2 monitors this was easiest way)
with 3 monitors I had similar problem and IT guy disconnected all the cables and only plugged them back in one at a time and restarted each time then it worked the same for windows and all programs
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me