June 2020, Copy & Paste From Excel & Word Documents (Windows 10 & Microsoft Office 365) Into MicroStation Connect Version 10.14.00.109.
We copy the spreadsheet or word doc "As-Is", then paste the image (format, text, lines, colors, borders, etc.) onto the drawing.
It has worked well for years, now, after update, it does not work at all ! ! !
Please advise / help - - I copy & paste many Excel Documents into my drawings.
Thank You
There was just the same discussion in the German forum.
You need to run the key-in mdl load olecntr. This loads the MDL routine needed. You can also change the config variable MS_DGNAPPS to the standard C:\Program Files\Bentley\MicroStation CONNECT Edition\MicroStation\MdlSys\Asneeded,olecntr.ma, so the routine gets loaded automatically.
Then the old behaviour is restored.
Thank you SO SO SO much - - - This does indeed work.
Now if Bentley can fix it on their end & update us - - - -
Defect 1090927 is resolved in MicroStation CONNECT Update 15.
Regards
Carl Myhill
Technical Support Engineer
Bentley Systems