I have been having problems with snapping to elements coming through from reference, it will work then suddenly for reason stop allowing snap.
Not sure if its related but I also can be navigating within a 3D environment or just zooming in or out and everything in the active model just disappears.!
It seems to be happening slightly more often since I started using Microstation Connect
Martin Brimble said:It seems to be happening slightly more often since I started using Microstation Connect
You had this problem previously with MicroStation V8i?
What graphics card do you have in your computer?
Regards, Jon Summers LA Solutions
I have tested opening the file with v8i version on Microstation and everything works fine..!
Very odd.. unless there is a random setting that Ive missed, it does seem to be a problem with Connect..?
Martin Brimble said:I have tested opening the file with v8i version
when this happens to me in v8i - 3d its usually the active depth is outside the display depth then I use a keyin for this, defined to a function key so I dont have to look it up all the time....
DD= -1000000, 1000000;DX=,,,;RESET
I hope this helps range is really up to you but I work in mm sometimes and other times in metres so this works for me both ways
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
Thanks Lorys,
Ill look into this today and let you know, it sounds like it might be a good fix.