We sometimes experience problems with attached reference files that are not properly located. The problem arises both with attached models from the same design file, but also when attaching models from other design files. In the clip below you can see an example where the same model is attached twice but is shifted approx. 2.6m in reference slot 1 (the designfile is attached). The only difference i can see is that the orientation is inaccessible for the reference in slot 1 while the rotation is 0° for the reference in slot 3.
We use Bentley Map SS4 but the problem is the same in Opencities Map Update 5, which is where the screenshot comes from.
I hope someone can help us.
Test_Lodsejer.dgn
Regards, Jon Summers LA Solutions
In the shown example, it is the same model that is attached twice, so the setup is the same. The problem lies in the attachment of the reference in slot 1 which for some reason is shifted 2.6m towards north.
Hi Peter,
Based on the Description in slot 1 it looks like you are using WFS Boost to create that attachment.
You should probably reach out to Rune Tvilum, the creator of the WFS Boost add-in, and see if he can help with this issue.
Regards,Ron
Please contact Rune and we can figure it out together.
In this case the WFS model has been attached by WFS Booster developed by Rune, but we experience the same problem with attacments made by Microstation / Bentley Map. Rune is a former colleague of mine, and we have been using WFS Booster for several years without any problems, but i will of course contact him if it turns out that WFS Booster is the problem.