Main Tool Box

Main Tool Box disappears every time MS is closed. After reopening the program, I have to go to FILE/SETTINGS/TOOL BOXES/select MAIN. The tool box reopens right where it was docked before and with the same settings. It just disappears when the program is closed. Save settings has no impact. All the other tool boxes stay in place.

Parents
  • Which version of MicroStation are you using? Are your standards stored on a network, or is everything local? Do you have write access to your user preference directory?

    While there may be other, better answers, I have seen all different sorts of strangeness occur when a UPF (preference file) gets corrupted. It happens...You could always check out the procedure in This Article to see if it solves your problem

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

Reply
  • Which version of MicroStation are you using? Are your standards stored on a network, or is everything local? Do you have write access to your user preference directory?

    While there may be other, better answers, I have seen all different sorts of strangeness occur when a UPF (preference file) gets corrupted. It happens...You could always check out the procedure in This Article to see if it solves your problem

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

Children
No Data