Trying to wrap my head around sheet setups
When I setup an Arch D sheet (24" x 36") the upper right corner does not hit 24.00000 x 36.00000 exactly and I was trying to understand what it was doing (see attached).
Is it just how Bentley made the sheets or is there a scaling issue going on?
Being a surveyor in New Jersey my default is to be in U.S. Survey Feet so it always throws minute scales into things
Brian
OpenRoads Designer 10.08.01.33
2020_SMG_Text-Dim.dgn
Believe the solution to this is to set your coordinate readout to 3 or 4 decimal places. We all work in feet, inches and other units. The US Survey Foot is what I use as well.The software works with UORs/bits if you will. Always gonna be some slop with all that dividing by 12 and such. The Autodesk driven CAD field for years more or less ignored the whole survey/international foot thing, so many still don't get it. Has caused no small amount of trouble, especially on geographically large projects.
www.civilgeo.com/.../
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley