Using OpenRoads Designer 2020 Release 2 which is built upon Microstation CONNECT update 13.
I have a container file that is referencing files A B and C. This container file is referenced into a sheet file, Live nesting depth 1. The reference setting Display Overrides is set to never so that I can control the display of all of my sheets from the container file. This setting is not working - in the example I provide in the attached Zip file - the sheet file has no levels displayed even though all levels are displayed in the container.....
I'm sure this is something incredibly simple but I'm not even sure where to look...
It works....The issue ended up being a configuration variable. I was making changes trying to fix another issue. I went back to an old config file and the levels were displayed as expected.
Now I just wish I knew which config variable gave me the issue....
Make a saved view in the container file. In the sheet file attach the reference using saved view, synchronise set to All, Display Overrides set to Never, Live Nesting =1. That should work for you.
I followed this workflow and have the same result. No levels are on in my sheet file after attaching the container with a saved view.
Sounds you need to set live nesting =2
No the files are there. If I turn overrides = allow then I can turn the proper levels on and save settings. But this defeats the purpose of managing levels through a container.
in your sheet file, were any of the referenced files levels changed at any point ? (for testing, etc...)
CADD Manager | CADD Department
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691