MicroStation CONNECT 10.14.02.01.
i created the cell below with my debris netting depicted in green color
but each time i insert the debris netting colour changes to white/black as shown below
Can someone please tell how i can resolve this colour disparity on insertion.
when you created the cell, did you place the data on the correct levels, or use default?
also can you check the colour tables between the 2 files (cel and DGN)
Also, are you placing the cell with the "Relative" option checked? That can place it on levels that you don't quite expect.
Do you have any level overrides set, or turned on in your view?
Microstation 08.11.09.829Power GeoPak 08.11.09.878Power InRoads 08.11.07.615
Answer Verified By: Henry Eduvie
due to the peculiarity of the cell, i used various level types for objects within the cell as opposed to the global default.
One other thing to check is what type of cells you created, Graphic Cells or Point Cells.
Graphic Cells will get placed using the symbology with which they were created.
Point Cells will get placed using the active symbology.
If you created Graphic Cells they should always get placed as green, Point cells will get placed in the active color.
You might also check your View Attributes to make sure the Level Overrides is not turned on.
you are spot on. Why? I tried inserting again with the "Relative" option unchecked this time and Alas! problem resolved.
i really appreciate your help
Thanks guys and have good weekend