Hello,
I have some couple of question below regarding the custom linestyle in microstation connect.
I created a custom linestyle to be 1m dashed and 1m gap. I used points to create the dashed segment so that the length is always fixed. However, when I tried it, the lines appeared to be hollow even the "fill attribute" is on.
1) how to display custom linestyle to have fill/solid?
2) is it possible to set custom linestyle to follow the bends/arcs
thank you.
Jenel.rsc
try this one…
It sounds as if you created a "dash" point component instead of an actual dash.
You can create your dash to a known size, and you can assign it a width so that it will be filled in.
The setting you want for the corners is "Break". This "bends" the linestyle around corners
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
This is awesome Miroslav! thank you. However, what I want is for each segment to show only the exact length (which is 1m) and hide those less than 1m. Also, the line still appears hollow even though I set the "fill" in view attributes.
Thanks MaryB, however what I want is to display only the segment with exact length and hide those less than the specified length that's why I came up with point components.
use the shift pattern line style tool to hid the portion less than 1 m.
What length and width is the dashed line and what length are the gaps... I may have a local DOT road line marking linestyle that does what you want
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me