Custom Line style

ok I found a  line that's close at scale 1 by default  its 100 wide fill,   600 long and  600 gaps  but  if you use 1 divided by 0.6  as a LT scale over ride and put on specific level it draws as 167 wide, 1000 , 1000 and  works with arcs and corners etc..  its name is turn line broken, but you can rename it.. I used the linestyle to draw it in empty file then used the

Element>Linestyle >edit>export to dgn

you can then do the same with export/import to rsc and  add it to rsc folder... you should be able to rename it there... but again you have to scale it to use it  or maybe add it to a dgn lib already scaled and if you use it leave level preset…that's my  personal preference

...lines.dgn

use the shift pattern line style tool to hid the portion less than 1 m.

What length and width is the dashed line and what  length are the gaps... I may have a local DOT road line marking linestyle that does what you want

Thanks MaryB, however what I want is to display only the segment with exact length and hide those less than the specified length that's why I came up with point components. 

This is awesome Miroslav! thank you. However, what I want is for each segment to show only the exact length (which is 1m) and hide those less than 1m.  Also, the line still appears hollow even though I set the "fill" in view attributes.

It sounds as if you created a "dash" point component instead of an actual dash.

You can create your dash to a known size, and you can assign it a width so that it will be filled in.

The setting you want for the corners is "Break". This "bends" the linestyle around corners