Is there anyone who has a solution to "Run through corners" ?

I was a little unclear, this also applies when I save my file as a DGN-file. When I open the DGN-file again, it has lost the "run through corners" setting.

Why does not the settings remain, that is my question.

We constantly receive feedback / comment that the customer wants lines that flow through the entire line, not broken at the insert points / breaking points.

Anyone have any solution? 

Where are these linestyles defined?
Are you working on DWG files, DGN files, or are you working with some other software package altogether? What version of your software are you using?

Are you creating these files with something that isn't MicroStation or AutoCAD, but expecting the drawings to display the same way as they do in your host software?

Here is 3 printscreens of same area, created from same dgn-file, open in MS CONNECT.

Original dgn-fil (3D) 

- Line style works

- Run through corners works

Dwg-file (3D)

- Line styles dosnt show

- Run through corners does not work

Dwg-file (2D)

- Line style works

- Run through corners does not work

We often have to send 3D and 2D dwg-file just to get the line styles to work completely. It is some kind of problem with line styles and 3D files and thats know for authorities and our customers.

But as you can see "run through corners" does not work even in 2D dwg.

There is no such thing as 2D DWG not in way as MS 3D or 2D models. Better use Trueview DWG viewer to check how it looks in ACAD as checking files in Microstation may not show correctly as Microstation can find SHX or RSC files in local Workspace and show linestyles incorrectly.

Where are the corners? I do not see difference except one screenshot is missing linestyles for some reason.

If possible provide examples as DGN and DWG files so we can take a look.

When I mean 2D dwg-file I mean that it is first exported to a 2D dgn-file, then exported to a dwg-file.

If you look at the geen and blue lines, you can se the problem. 

This prinsscreen is a 2D dwg shown i TrueViewer.

And this is the original dgn-file in MS

It means these lines restart at each segment so it seems as if they break at corners. Because DWG has centered linestyles it means the start and end stroke may be shorter and longer depending on segment length so it looks different as the stroke length changes at each vertex. Better try to use Remap table and provide a LIN definition file there so MS doesn't try to convert MS lines to DWG lines.

Please create a DGN with one of these lines with it's linestyle embedded and attach here so I can check what is happening maybe it is true that automatic conversion produces wrong result. Also a working DWG example how it should look. Without that it is hard to help.

It means these lines restart at each segment so it seems as if they break at corners. Because DWG has centered linestyles it means the start and end stroke may be shorter and longer depending on segment length so it looks different as the stroke length changes at each vertex. Better try to use Remap table and provide a LIN definition file there so MS doesn't try to convert MS lines to DWG lines.

Please create a DGN with one of these lines with it's linestyle embedded and attach here so I can check what is happening maybe it is true that automatic conversion produces wrong result. Also a working DWG example how it should look. Without that it is hard to help.