Construct perpendicular to element tool in Connect

Recently upgraded to latest Connect version and lost this Manipulate tool.  Any ideas where it is?  I had found it once, but can't locate it again.

Parents
  • those  are from V5.5 menu   which can still be found in V8i and  V10 under  55menu.dgn ( turn on level 63 to see the commands) there is also  8menu.dgn

    These were intended for using the digitiser but I also found it handy  to build keyins etc  they use the action strings and also the  2 letter primitive commands ( very early mstn / IDGS I think)

    They may not all work in your version ie Connect  but worth a try if your looking for fancy keyins to make your own tools

    Lorys

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Reply
  • those  are from V5.5 menu   which can still be found in V8i and  V10 under  55menu.dgn ( turn on level 63 to see the commands) there is also  8menu.dgn

    These were intended for using the digitiser but I also found it handy  to build keyins etc  they use the action strings and also the  2 letter primitive commands ( very early mstn / IDGS I think)

    They may not all work in your version ie Connect  but worth a try if your looking for fancy keyins to make your own tools

    Lorys

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Children