complex shape to shape

Hi Guys,

I need to convert the complex shapes to shapes in my project .How can I do it in batch?

Parents
  • Do these complex shapes contain arcs, or are they just lines/line strings? Microstation usually automatically converts "complex shapes" to "shapes" on creation if they are all linear segments. You may be able to use the Facet Curve tool to eliminate arcs, but you should check that manually before trying to use it in a batch. You may not get the results you expect on the first try.

    MaryB

    Microstation 08.11.09.919
    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918

Reply
  • Do these complex shapes contain arcs, or are they just lines/line strings? Microstation usually automatically converts "complex shapes" to "shapes" on creation if they are all linear segments. You may be able to use the Facet Curve tool to eliminate arcs, but you should check that manually before trying to use it in a batch. You may not get the results you expect on the first try.

    MaryB

    Microstation 08.11.09.919
    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918

Children