Z origin of text in Properties stopped working CONNECT

Recently my ability to change the Z Origin of text in Properties->Geometry has stopped working. I can adjust other element's elevations just fine, but text no longer works. 

This is file specific and also effects new files from seed. Some existing files it works. Other files it won't. I can adjust it just fine in existing problem files with ORD.

What setting got flipped where the ability to change this to 0 broke?

Thank you!

Microstation CE Update 15 - 10.15.02.11

Parents
  • test3d-textgeometry.dgn

    Just to note that this issue is also being investigated in SR # 7001241705.

    ----------------

    I have tested this operation with a new DGN file in MicroStation CONNECT Edition (Update 15 ) 10.15.02.11 with some basic text and I am able to adjust all of the Geometry - Origin X,Y,Z values ok.

    There is a possibility that either something is wrong with some of your files or there may be issues with the type of text elements in these files. Have some of these files been produced in other Bentley or 3rd party software packages? You mentioned OpenRoads Designer. Have these text elements been produced in this software? If you are saying you've produced new files which are also affected, are you using the seed files that come in the latest version or could they be from an much earlier version?

    It would be very helpful if you could provide example design files where we can try to reproduce your issue and possibly see whether there is some wrong with the files or text elements.

    FYI You might also like to investigate the use of the new Set Element Elevation tool which was ported from the old Civtools companion application.

    https://communities.bentley.com/products/microstation/b/microstation_blog/posts/new-in-microstation-connect-edition-update-12---set-element-elevation-tool

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Reply
  • test3d-textgeometry.dgn

    Just to note that this issue is also being investigated in SR # 7001241705.

    ----------------

    I have tested this operation with a new DGN file in MicroStation CONNECT Edition (Update 15 ) 10.15.02.11 with some basic text and I am able to adjust all of the Geometry - Origin X,Y,Z values ok.

    There is a possibility that either something is wrong with some of your files or there may be issues with the type of text elements in these files. Have some of these files been produced in other Bentley or 3rd party software packages? You mentioned OpenRoads Designer. Have these text elements been produced in this software? If you are saying you've produced new files which are also affected, are you using the seed files that come in the latest version or could they be from an much earlier version?

    It would be very helpful if you could provide example design files where we can try to reproduce your issue and possibly see whether there is some wrong with the files or text elements.

    FYI You might also like to investigate the use of the new Set Element Elevation tool which was ported from the old Civtools companion application.

    https://communities.bentley.com/products/microstation/b/microstation_blog/posts/new-in-microstation-connect-edition-update-12---set-element-elevation-tool

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Children