New levels on reference not displayed in master file

Question

I followed all the steps bellow and still not showing the new level on the sheet file 
 
 Go to Level Display (from menu Settings > Levels > Display ) 
 At the top there is a drop down option (when set to Global Display all levels appear to be turned on) 
 Change this toggle to View Display 
 Check if the reference levels in question are turned on 
 See video attached below showing this... 
 
 Global Display controls the display of levels for all views. View Display only controls display for the selected/active view.

Use MS_REF_NEWLEVELDISPLAY configuration variable (Default Setting) New levels in the reference are displayed according to the setting for the MS_REF_NEWLEVELDISPLAY configuration variable. If this variable is set, MicroStation displays newly created levels in references. By default, when new levels are created in a model that is referenced by another model, the new levels are not displayed when the referencing model is opened. Newly created models are considered until "Save settings" is performed. This functionality only works when both the master file and referenced files are in the V8 file format. Always New levels in the reference are always displayed. Never New levels in the reference are never displayed.

Lorys · Answer

are you ref attaching to the model and then ref attach model to the sheet as a nested ref or are you attaching direct to the sheet? 
 IMHO your workspace config needs to have new levels display set to the MS_REF etc set to =1 then its automatic in the ref manager you don't change it see below wokspace config so after you added your ref and later you add new levels in your ref and come back to your drawing all new levels post attachment time will now display on your drawing.. if not set to 1 will not display and no save settings needed...