Everything I have found about turning off the WorkSet Mismatch Alert in MS U15 seems to indicate that the only option is to turn the alert OFF, and use the WorkSet the DGN is branded with when it is opened.
Is that really the only option?
We were assured in a Service Request to Bentley that there would be/was an additional option to turn it OFF, and use the user's currently Active WorkSet when the DGN is opened.
We needed both options, and have been waiting for MS U15 to provide some relief.
Could someone at Bentley let us know exactly what the option(s) really are?
Thanks,
G,Houck
Here is a discussion about the "Enhancement Request" Bentley has on file: https://communities.bentley.com/products/microstation/f/microstation-forum/200094/workset-message-when-opening-file/597381#597381
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Thanks, MaryB. Your link goes to Andrew Bell's response, which has a link to Enhancement 1060165, from which I get a 'tfs.bentley not found'.
I was told by Bentley to add our name to the enhancement request, and I will scope that out.
Thanks again,
G.Houck
Just to note, any link to Enhancements or Defects in our responses go to internal Bentley systems. If you have the same issue you should raise a new Service Request via the online manager and we can link this to the existing Enhancement.
RegardsAndrew BellTechnical SupportBentley Systems