Custom line type ends

Here you are Lorys.

The Place Active Line Terminator tool has been around since IGDS, and works basically the same as it always has.

1. Select a cell in a cell library and make it the active Terminator cell.
   
   
   
2. Start the Place Active Line Terminator tool
   
   
   
3. Configure the tool settings. Just like in the Place Active Cell tool settings you can click the Browse button (... button) to open the cell library dialog and set the active terminator cell here.
   
   
   
4. Identify the line at the end where you want the terminator placed.
   
   
   
5. The cell is placed at that end and automatically rotated to match the direction of the line.
   
6. The new part starting in MS CE Update 7 is that the terminator cell is now automatically associated with the line on which it is placed. If you move/modify the line, the cell goes with it and reorients to match the new line direction.
   
   
   

Here you are Lorys.

The Place Active Line Terminator tool has been around since IGDS, and works basically the same as it always has.

1. Select a cell in a cell library and make it the active Terminator cell.
   
   
   
2. Start the Place Active Line Terminator tool
   
   
   
3. Configure the tool settings. Just like in the Place Active Cell tool settings you can click the Browse button (... button) to open the cell library dialog and set the active terminator cell here.
   
   
   
4. Identify the line at the end where you want the terminator placed.
   
   
   
5. The cell is placed at that end and automatically rotated to match the direction of the line.
   
6. The new part starting in MS CE Update 7 is that the terminator cell is now automatically associated with the line on which it is placed. If you move/modify the line, the cell goes with it and reorients to match the new line direction.