Where can I find the settings to change the gap ratio to numbers in microstation v8i ss3 version 08.11.09.587.and windows 10 when measuring the area using the flood option.
Appreciate your help.
Steve Smith said:to change the gap ratio
There is no "gap ratio" settings, only "gap" in a meaning of distance (gap size).
As Andrew Bell wrote, the format, how values are displayed, is defined by working units settings.
Steve Smith said:when measuring the area using the flood option.
It would be nice to share an example of geometry where the measuring does not work. It's not clear how you working units are set, but 0.00012 of sub unit looks like under standard resolution setting, so probably no gap is accepted.
Please, do not use docx to share images. To open untrusted docx files is generally dangerous (because can be malicious). Why to not attach to the post jpg file directly?
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
I found the max gap on flood fill create region seemed to work better in v8i than in Connect 13 ... but it might just be my data..
example would be I have 0.02m actual gap in a line ie they are not joined or single line, in V8i I would set the max gap trial and error a few times and it would literally jump the gap and create a closed element fill.. but in connect this is not working for me no matter what number I set.. I just have to go find gaps when it wont fill.. I suppose I should use data clean up flag gaps but the source file is a ref file and i want to create coloured filled shapes in the active file.....anybody else found this or figured it out? My quick fix is to make smart line criss cross over several places in my line work then try and flood file in between until I find the little portion that refuses to fill ie enclosed.. ( by the way arcs in complex lines are particularly sensitive to this not working in Connect 13 for me..
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
Lorys said:I found the max gap on flood fill create region seemed to work better in v8i than in Connect 13 ... but it might just be my data
There are a number of tools that, as related in this Forum, don't work quite the same way in CONNECT as they did in V8i. Can you isolate a problem set of boundary lines & curves and attach that DGN here? That way, the analysts have something to work with.
Regards, Jon Summers LA Solutions
We have noticed the same. The max gap on flood fill create region works better in v8i than in any versions of CE (currently CE16). That is one of many CE related problems that keeps our Microstation users using V8i SS10 instead of CE. We are using flood fill a lot so this is a harmful bug.
I have reported it that Max(imum) Gap is not working as expected but got reply that it is WAD. Asked then to at least explain it in documentation but nothing has changed.
The help is wrong, it has never worked in v8i or CE the way it is explained in help. Even when connected the end points it didn't connect by shortest distance but connected point before last point to first point. I no longer show max gap as an option to users as it is too complicated to explain what to expect just set it to 0:
Max Gap:(Method set to Flood only) Sets the largest distance allowed between consecutive elements. If zero, the elements must connect to bind an area.
Screenshot from year 2014:
Ok I built some new data then tried in both v8i and CE and it still works as it always has even with arcs and islands the trick is understanding what that max gap means so in my new example I have complex line , arcs and straights but a deliberate GAP between an Arc and a line of 0.00955 m when I try flood with max gap 0 or 0.01, or 0.1 or 0.2 it fails and spills out ,
However in both versions if I set the max gap to 0.015 it jumps the gap and creates the filled region and locates the interior islands
I tried 0.012 and it fails even if rounded up my real gap 0.01m so it works but the number of the max gap doesnt really relate to the true gap as it would be expected... previous results must have been the data itself was bad leading to false conclusion regarding Connect edition and this tool.. but I only tried a single set of line works...
oops I thought I did .. went off line before I noticed .. now attached
Lorys said:so in my new example
Why you do not share your example? Just to talk about the data it quite useless...