Where can I find the settings to change the gap ratio to numbers in microstation v8i ss3 version 08.11.09.587.and windows 10 when measuring the area using the flood option.
Appreciate your help.
Steve Smith said:to change the gap ratio
There is no "gap ratio" settings, only "gap" in a meaning of distance (gap size).
As Andrew Bell wrote, the format, how values are displayed, is defined by working units settings.
Steve Smith said:when measuring the area using the flood option.
It would be nice to share an example of geometry where the measuring does not work. It's not clear how you working units are set, but 0.00012 of sub unit looks like under standard resolution setting, so probably no gap is accepted.
Please, do not use docx to share images. To open untrusted docx files is generally dangerous (because can be malicious). Why to not attach to the post jpg file directly?
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
I found the max gap on flood fill create region seemed to work better in v8i than in Connect 13 ... but it might just be my data..
example would be I have 0.02m actual gap in a line ie they are not joined or single line, in V8i I would set the max gap trial and error a few times and it would literally jump the gap and create a closed element fill.. but in connect this is not working for me no matter what number I set.. I just have to go find gaps when it wont fill.. I suppose I should use data clean up flag gaps but the source file is a ref file and i want to create coloured filled shapes in the active file.....anybody else found this or figured it out? My quick fix is to make smart line criss cross over several places in my line work then try and flood file in between until I find the little portion that refuses to fill ie enclosed.. ( by the way arcs in complex lines are particularly sensitive to this not working in Connect 13 for me..
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
Ok I built some new data then tried in both v8i and CE and it still works as it always has even with arcs and islands the trick is understanding what that max gap means so in my new example I have complex line , arcs and straights but a deliberate GAP between an Arc and a line of 0.00955 m when I try flood with max gap 0 or 0.01, or 0.1 or 0.2 it fails and spills out ,
However in both versions if I set the max gap to 0.015 it jumps the gap and creates the filled region and locates the interior islands
I tried 0.012 and it fails even if rounded up my real gap 0.01m so it works but the number of the max gap doesnt really relate to the true gap as it would be expected... previous results must have been the data itself was bad leading to false conclusion regarding Connect edition and this tool.. but I only tried a single set of line works...
oops I thought I did .. went off line before I noticed .. now attached
Lorys said:so in my new example
Why you do not share your example? Just to talk about the data it quite useless...
ok posted dgn so anybody got solution how to determine what the right number is or really means
I may have stumbled onto something and I don't like my findings one bit...
Looking at your DGN file, there is actually another gap North of your annotated gap.
I work in millimetres and my files always open in that unit so I will continue my post using those values.
The true distance of the annotated gap is 9.55mm (to 2DP)
The true distance of the additional gap is 15.27mm (to 2DP)
When I set the max gap value to 15.27 the region works
I manually tested different smaller values reducing by 0.1 and then 0.01 until I found that 14.79 works but 14.78 does not.
Here comes the bad part...
We all likely expect the gap value to the be the magnitude of the vector from 2No points (i.e. the true distance), however when I dimensioned the gap, I found the largest orthogonal dimension closely matched the value I had determined manually!
Fearing the worst I decided to change the dimension accuracy and max the design file accuracy to 6DP:
It seems my fear is unfortunately true (right click on the image and open in new tab/window for true size):
In the above capture I measure the largest orthogonal distance using Distance between Points, copy the value and paste that in the the Create Region gap box. You can see the highlight shows the outer and inner boundaries are valid and that the region can be created. After cancelling, I reduce the gap by 0.000001mm (one millionth of a millimetre!!) and sure enough the region creation fails.
1 instance doesn't prove anything and could be a freak result, so I used modify element to align the above endpoints and tried the same proof with your original gap. The difference is its smaller and that the largest size is measured horizontally instead of vertically however I found the exact same result that reducing the gap size by 0.000001mm from its X dimension causes it to fail.
Shoddy work Bentley, very Shoddy!
Now my V8i SS10 feels somewhat tainted
Excellent analysis! You provide examples and show your working. If only everyone would do the same!
Regards, Jon Summers LA Solutions