Hello,
Where can I find the settings to change the gap ratio to numbers in microstation v8i ss3 version 08.11.09.587.and windows 10 when measuring the area using the flood option.
Appreciate your help.
.bentley.docx
Max gap is not working as expected so it is almost unusable.It works only in very specific cases.
Your response, " .It works only in very specific cases" is very vague what special do they work in?
I am using this to calculate the area.
Thanks
MicroStation V8i (SELECT series 3) - Version 08.11.09.578
Microstation Connect 10.14.00.109
I believe from your description what you are referring to is the format used in the Maximum Gap selection that is showing as a ratio of X:Y.
This is defined as MU:SU in the Design File Settings.
Working Units
RegardsAndrew BellTechnical SupportBentley Systems
Hi Steve,
Steve Smith said:to change the gap ratio
There is no "gap ratio" settings, only "gap" in a meaning of distance (gap size).
As Andrew Bell wrote, the format, how values are displayed, is defined by working units settings.
Steve Smith said:when measuring the area using the flood option.
It would be nice to share an example of geometry where the measuring does not work. It's not clear how you working units are set, but 0.00012 of sub unit looks like under standard resolution setting, so probably no gap is accepted.
Please, do not use docx to share images. To open untrusted docx files is generally dangerous (because can be malicious). Why to not attach to the post jpg file directly?
With regards,
Jan
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
It only closes gap if the gap is for the same element. But you are lucky in SS3 it is more predictable than in CONNECT version.