Is there a similar key-in in MicroStation about "Align" command of AutoCAD?
Or do I have to move the element first and then rotate it with 3 points?
I have tried the key-in: DWG ALIGN unsuccesful.
thanks.
Barry, thanks for providing this tool. I was able to load this into CONNECT and upon a simple test I was able to use it to move & rotate a simple rectangle shape to a simple line. I did not do any further testing, but I did not have any issues loading or running the vba. This will be a nice addition and it is something that should be incorporated into the standard tools.
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453
Aligns objects with other objects in 2D and 3D. Note: In AutoCAD LT this command is only available from the command line. One, two or three pairs of source points and definition points can be specified to move, rotate or tilt selected objects by aligning them with points on another object.
Regards, Jonathan Globerson
GloberDesign
Ian Lapper said:Thank you Barry
MaryB said:Thank you!!!
You're both welcome
Thank you Barry
Thank you!!!
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2