Is there a way of cutting multiple of holes, all in one process? This job gets to be time-consuming if you have a lot of holes cut inside a 3d structural channel for example.
Is there a quicker way to cut many holes at once through a Solid? I know you can do it with parametrics, which is not an option for me.
thanks.
v8i SS 10
If it is a smart solid, then preselect all the cutting profiles 1st, then start the cut command. It will ask you to accept the preselected profiles, once you do that you can select the smart solid & it will cut them all at once. If they are on the same cutting plane, you can select more than one smart solid to cut as well, just follow the prompts for directions.