I can't get the "Move to Contact" tool to work. I click on an element, define my direction, and then nothing happens. I've got V8i select series 10 version 08.11.09.919 on windows 10.
I agree with Andrew Bell that to share e.g. picture in what context the tool is used can help to analyze the problem.
But, when I tried this tool in V8i SS10, I see the same problem: The tool does not work. When I used the same tool with the same DGN file in current MicroStation CE U16, everything is fine. So to create Service Ticket to report bug probably makes sense.
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
Jan Šlegr said:But, when I tried this tool in V8i SS10, I see the same problem: The tool does not work. When I used the same tool with the same DGN file in current MicroStation CE U16, everything is fine. So to create Service Ticket to report bug probably makes sense.
What point is there in doing that if Bentley aren't going to release any further updates to V8i?
Ron, when I follow this procedure I'm able to create points at the end of the lines, but when I click to select them the points disappear. How did you turn those points into selectable elements?
Ryan,When you do the Evaluate Curve command you do the following.
I don't think you are doing the second data point to accept the results.
Thanks Ron, I figured out it looks like the points were actually being created but they were just so tiny I couldn't see them. I selected them and put them on a different layer with much heavier line weight and then I could see them. Not sure if that's the best way to do it but it worked. Thanks!
Ryan, In my video you can see that just before using Evaluate Curve, I change the weight and color. If you want, you can change the active level too.
Ah that makes sense! Thanks again, this has all been very helpful!