I opened an existing file and it only shows a gray screen.
Hi Koog
In the views it appears someone has turned OFF view 1. Look at the bottom left you will see 1-8 options, turn on 1.
This is typical for someone that uses ACAD.
Ian
Wow, I didn't catch that Ian.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
Ian,
At first it seems that was the problem. I clicked to turn on view 1. The drawing started opening, then I got this message:
Then this one:
Maybe try opening view 2 instead. Seems like the file may be corrupt. What if you open another file then reference this file to it. If that works and the elements look correct create a new empty file from s known good seed file, reference in this file and merge it to the new file. The corruption could be caused by non-visible elements in the file which should be filtered out during the merge process.
Answer Verified By: Koog
mwlong,
That worked !!
Thanks