Hello, I'm looking for some advice on getting rid of a couple of annoying graphical elements that I can't see on the design model. I have run a CADQA check on one of our
drawings and the results state the following -
Error: element (Element Type106) with id (221506) in model (WB-Drawing Model) found'.Error: element (Element Type106) with id (234753) in model (WB-Drawing Model) found'.Error: 2 graphical elements found in the Drawings design modelNo elements found on Level '0' or 'Default'.
The problem is that I can't see the '2 graphical elements' that it is referring to. I'm very knowledgeable with MicroStation but this one has floored me. I had something like this
happen before and had a key-in which fixed it in seconds but I can't remember what this was as it was a while ago now.
I've tried all the usual things of removing shared cells, using explorer to look for the elements, searching using their ID number etc.
Does anyone have any advice or know of the key-in which could help?
I'm using MicroStation Connect version 10.13.00.48
Thanks in advance.
Steven Margach said:getting rid of a couple of annoying graphical elements that I can't see
You should be able to search by id number.. this was pretty easy in v8i but not sure about connect..a quick google search microstation by element id has found that LA solutions has made a vba macro so it will work in both versions
http://www.la-solutions.co.uk/content/connect/mvba/MVBA-ElementLocator.htm
this should locate the element for you and you could examine it more closely maybe has same colour as BG or black..can't tell until you use it..
then if these are on a unique level you could delete them and the level too... there are specific keyins for that too...
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me