Unable To Locate Graphical Elements On Design Model

Hello,  I'm looking for some advice on getting rid of a couple of annoying graphical elements that I can't see on the design model.  I have run a CADQA check on one of our

drawings and the results state the following -

Error: element (Element Type106) with id (221506) in model (WB-Drawing Model) found'.
Error: element (Element Type106) with id (234753) in model (WB-Drawing Model) found'.
Error: 2 graphical elements found in the Drawings design model
No elements found on Level '0' or 'Default'.

 

The problem is that I can't see the '2 graphical elements' that it is referring to.  I'm very knowledgeable with MicroStation but this one has floored me.  I had something like this

happen before and had a key-in which fixed it in seconds but I can't remember what this was as it was a while ago now.

I've tried all the usual things of removing shared cells, using explorer to look for the elements, searching using their ID number etc.

Does anyone have any advice or know of the key-in which could help?  

I'm using MicroStation Connect version 10.13.00.48

 

Thanks in advance.

Parents
  • Try using the key-in Level Element Delete <Level Name> (where Level Name is the name of the level the elements are on). This is usually pretty successful. If this does not work create a new blank file from a known good blank file and reference the original file to it then merge to master. This will remove any invisible data.

    You can use Level Element Purge <Level Name> but that just moves the elements from the designated level and places them on the Default level. 

    Power InRoads v8i 08.11.09.615

    Microstation CONNECT 10.16.01.56

    Microstation v8i SS 10 08.11.09.919

    ORD CONNECT 10.9.0.1

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.434

Reply
  • Try using the key-in Level Element Delete <Level Name> (where Level Name is the name of the level the elements are on). This is usually pretty successful. If this does not work create a new blank file from a known good blank file and reference the original file to it then merge to master. This will remove any invisible data.

    You can use Level Element Purge <Level Name> but that just moves the elements from the designated level and places them on the Default level. 

    Power InRoads v8i 08.11.09.615

    Microstation CONNECT 10.16.01.56

    Microstation v8i SS 10 08.11.09.919

    ORD CONNECT 10.9.0.1

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.434

Children