Hello, I'm looking for some advice on getting rid of a couple of annoying graphical elements that I can't see on the design model. I have run a CADQA check on one of our
drawings and the results state the following -
Error: element (Element Type106) with id (221506) in model (WB-Drawing Model) found'.Error: element (Element Type106) with id (234753) in model (WB-Drawing Model) found'.Error: 2 graphical elements found in the Drawings design modelNo elements found on Level '0' or 'Default'.
The problem is that I can't see the '2 graphical elements' that it is referring to. I'm very knowledgeable with MicroStation but this one has floored me. I had something like this
happen before and had a key-in which fixed it in seconds but I can't remember what this was as it was a while ago now.
I've tried all the usual things of removing shared cells, using explorer to look for the elements, searching using their ID number etc.
Does anyone have any advice or know of the key-in which could help?
I'm using MicroStation Connect version 10.13.00.48
Thanks in advance.
Finally got it sorted. It was indeed a couple of rogue elements that no matter what I did I couldn't see or remove. I spoke with someone who had a VBA code written for such annoying situations which found and removed them. Thanks again for the help.
Answer Verified By: Steven Margach
Would you be able to share this VBA code, in case any of us find ourselves with stubborn rogue elements?
Microstation 08.11.09.919Power GeoPak 08.11.09.918Power InRoads 08.11.09.918
Unfortunately not. The person who ran it for me couldn't share it with me either due to company policy and data protection etc. I would also have liked to have had it truth be told.