[U16] Minimum window view inaccuracy

Is it possible to increase accuracy of view display for curve elements?

When trying to snap to curve it shows tentative point in different location as it is displayed in view. No such issue in v8i version or with B-spline but those are evil and causes different problems in 2D drafting.

Example attached.

ST-snap2curve.dgn

Parents
  • Minimum Window can only show a certain level of accuracy because you are approaching the limits of the working units. What you see visually may be an extrapolation compared to the actual unit points.

    MaryB

    Microstation 08.11.09.919
    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918

Reply
  • Minimum Window can only show a certain level of accuracy because you are approaching the limits of the working units. What you see visually may be an extrapolation compared to the actual unit points.

    MaryB

    Microstation 08.11.09.919
    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918

Children