MS CE U16
I don´t know if this scenario is WAD or not:
If "AccuDraw" is ON and then I draw a polyline (Place SmartLine) with several segments and press Tentative Point (left and right button). If I do Reset button (right-click) then I could pick to another location.
But.
If "AccuDraw" is OFF and I do the same:........................................................................................................................................................................................................... then it is a CANCEL, so I would create a new polyline if I pick a new location.
So, AccuDraw and Tentative point are related together?
Example with "AccuDraw= ON" first and then OFF.
Joan Martínez Serra said:I don´t know if this scenario is WAD or not
AccuSnap automates the tentative snap process. Tentative points are legacy technology, superseded by AccuSnap many years ago.
When AccuSnap is active, it assumes the responsibility of creating tentative points. You don't need to place a tentative point.
Joan Martínez Serra said:AccuDraw and Tentative point are related together?
Read about AccuDraw and the Tentative Point: Creating precision offsets is a fundamental function of the design process. AccuDraw performs this important function by utilizing tentative points. These can be input manually, or you can further streamline the process using AccuSnap.
Regards, Jon Summers LA Solutions
Answer Verified By: Joan Martínez Serra