Hello,
It's possible to add others options (C, PL, CL, ...) in the dialog box for Suffix Text?
Thank you
Once the dimension is placed you can edit the text and add a symbol. Depending on the font chosen you will have different options.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
still same old problem we had in v8i and before...the problem is compounded if your active font doesnt support said symbols which is often the case..
I can use mixed font in dims , note leaders and text but its a pain in the B#*.. so I've reverted back to using cells with the right font text dropped to lines...not the best fix but quicker
In v8i ss10 the text favourites doesnt remember to use the different font ie say the active text is arial and you need the symbol from font 105 capital X ... you save it as a favorite under symbols and next time you try it doesnt remember the source font so you have to set the extra font and reselect it from the insert symbols.. So does it remember the right source font in CE so you only select the favourite?.. I havent tried in CE yet
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
Lorys said:So does it remember the right source font in CE so you only select the favourite?.. I havent tried in CE yet
I just did an experiment with using an older .rsc font & a new TrueType font. I have the symbol from the TT font in my list of favorites. I was able to place text using the old .rsc font then I selected a symbol from my list and it is placed with the correct TT font. I did run into an issue though. If you try to edit the text Microstation crashes. The crash is probably expected since there are 2 different fonts and the program gets confused.
mwlong said:If you try to edit the text Microstation crashes. The crash is probably expected since there are 2 different fonts and the program gets confused.
Doesn't crash upon editing in V8iss10 on a piece of mixed font text.
Just doesnt remember the source font in the favourites so in v8i I name the favourite with the font no and Letter as part of the name
eg F105_8_Greater than .
So I can remember how to use it in mixed font.... bit more pc literate than a post_IT note on side of screen..