file type not recognized

RE: file type not recognized

Oto — Thu, 11 May 2023 15:06:42 GMT

If it is related to ProjectWise then ask in ProjectWise Design Integration Forum

You have to assign correct MIME types and reset any custom assignments by user.

RE: file type not recognized

Josh Miller — Thu, 11 May 2023 12:16:20 GMT

I can't say either way if I found the solution. MWLong's suggestion of creating a new file and referencing in the file in question seems familiar. I may have taken that route. A couple of things you can try would be to check your associations in PW. You may also want to consider reinstalling projectwise. I just ran across a situation in which PW would open any file except dgns. Sorry I can't give you more help than that.

RE: file type not recognized

Deepak Singh — Thu, 11 May 2023 06:30:37 GMT

Hi Josh,

Did you find any solution for the concern? I am facing the same issue at my end.

Using managed workspace and OpenRoads Designer.

Thanks
Deepak Singh

RE: file type not recognized

Tim Hickman — Mon, 15 Nov 2021 17:40:04 GMT

The message states that "MicroStation" cannot open the file.

Are you using MicroStation or OBD ?

found this:

https://communities.bentley.com/products/bridge_design___engineering/w/bridge_design_and_engineering__wiki/48343/openbridge-designer---new-file-format-obdx-in-v10-08-01

It seems that the OBDX file is specific to open bridge - so if you are attempting to use it in MicroStation it will not work - however - if you are attempting to open with open bridge and getting an error, then I would post this issue in the Open Bridge forum.

RE: file type not recognized

mwlong — Mon, 15 Nov 2021 15:32:37 GMT

Most likely the file is corrupt. Try to reference it to another file. If it references fine then start a new blank file from a good seed file then reference the file to it and merge it into the new file. The corruption is probably some non-graphical data. If that does not hopefully you have a backup file.