I am trying to open an open bridge designer file and get the following error. The file is located in a projectwise datasource Does anyone know why this would be happening? The file was working for someone else on Friday. It may be a corruption issue but I don't know.
Thanks
Josh
Most likely the file is corrupt. Try to reference it to another file. If it references fine then start a new blank file from a good seed file then reference the file to it and merge it into the new file. The corruption is probably some non-graphical data. If that does not hopefully you have a backup file.
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453
The message states that "MicroStation" cannot open the file.
Are you using MicroStation or OBD ?
found this:
https://communities.bentley.com/products/bridge_design___engineering/w/bridge_design_and_engineering__wiki/48343/openbridge-designer---new-file-format-obdx-in-v10-08-01
It seems that the OBDX file is specific to open bridge - so if you are attempting to use it in MicroStation it will not work - however - if you are attempting to open with open bridge and getting an error, then I would post this issue in the Open Bridge forum.
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
Hi Josh,Did you find any solution for the concern? I am facing the same issue at my end.Using managed workspace and OpenRoads Designer.ThanksDeepak Singh
I can't say either way if I found the solution. MWLong's suggestion of creating a new file and referencing in the file in question seems familiar. I may have taken that route. A couple of things you can try would be to check your associations in PW. You may also want to consider reinstalling projectwise. I just ran across a situation in which PW would open any file except dgns. Sorry I can't give you more help than that.
If it is related to ProjectWise then ask in ProjectWise Design Integration Forum
You have to assign correct MIME types and reset any custom assignments by user.