I was wondering if Open Roads can use Print Organizer.
When I run through the steps in Open Roads CONNECT Edition 2020 Release 3, I select 'Add Active File to Set' and it runs through the plan sheets that I have created with named boundaries. However, after the visual disappears and I have only the Print Organizer window up, there are no files added to my pset folder.
If I open this exact same file in MicroStation CONNECT Edition, I am able to add my plan sheets to the .pset folder.
Does Open Roads have the capabilities to use print organizer? Or is this a function that only works in MS CONNECT?
ORD does work with Print Organizer.
One thing to check is the Print Style you are using. If it does not find the print area, it will not add the dgn file to the pset.
The most common problem I've seen with this is that that Print Style has a shape definition for the print fence, and the shape is not found in the dgn file. In that case the file is not added to the pset.
With Named Boundaries, you should have sheet models for each of your sheets if you've carried the process all the way through. You can use the Sheet definition in the Print Style for the print area. You could also load the Sheet models into the Sheet Index. From there it's one click to transfer them to Print Organizer.
Rod WingSenior Systems Analyst