Microstation Connect
I have levels in my 3D model which I have deleted everything from (actually moved them to a different model - which is referenced into the original)
No elements found when displaying.
But the level manager still says there are elements present.
I think they are features from deleted solids.
The levels do not disappear when I compress.
Can I force a manual level delete ?
I'm using projectwise so it's not practical to just do a fence file to clear up that way.
Can I see a list of the elements microstation thinks are still there ?
Please help. My files cannot be audited with non-standard level names.
Thanks.
Hi Fraser,
Look at the documentation about usage of specific level:
Level Properties Usage
You can try to Remap Elements to Default level and then you should be able to delete this level.
Remap Elements
Regards,
Marta
Look in the Level Properties Usage tab and see what elements are reported. Most likely you have shared cell definitions (non-graphical data) on them. Use "Delete SCDEFS ALL" keyin to remove those. Then use the keyin "Level Element Delete <levelname>" to see delete any other non-graphical data which may be present. If those are successful then the level should delete. You can also try to compress the file as there could be un-used line styles embedded in the file.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453