Microstation Connect
I have levels in my 3D model which I have deleted everything from (actually moved them to a different model - which is referenced into the original)
No elements found when displaying.
But the level manager still says there are elements present.
I think they are features from deleted solids.
The levels do not disappear when I compress.
Can I force a manual level delete ?
I'm using projectwise so it's not practical to just do a fence file to clear up that way.
Can I see a list of the elements microstation thinks are still there ?
Please help. My files cannot be audited with non-standard level names.
Thanks.
Look in the Level Properties Usage tab and see what elements are reported. Most likely you have shared cell definitions (non-graphical data) on them. Use "Delete SCDEFS ALL" keyin to remove those. Then use the keyin "Level Element Delete <levelname>" to see delete any other non-graphical data which may be present. If those are successful then the level should delete. You can also try to compress the file as there could be un-used line styles embedded in the file.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
Hi Fraser,
Look at the documentation about usage of specific level:
Level Properties Usage
You can try to Remap Elements to Default level and then you should be able to delete this level.
Remap Elements
Regards,
Marta