Hi..I changed the ref by using browse option. But the ref data's not showing in the main dgn. I tried to change the nesting option and z value but it's not working.
Is it possible that the data is in a different model of the new drawing?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
I didn't get you
Hi Raja Raghu,
Could you please provide a screen shot of your references dialog? do you know if the referenced files has the display turned off?
Have you done a Fit View after attaching the file to verify if the referenced file is far away from your design?
MaryB said:Is it possible that the data is in a different model of the new drawing?
Within a Microstation file you can have multiple models. If you open the reference dialog box, highlight the reference file, right-click on the file and select Settings there will be a field called Model with a drop down. Is there more than one model within that list?
My first suspicion would be that the original reference file was clipped. When you change the reference file the clipping still remains and most likely the elements within the new file are outside the current clipping extents of the reference file. Delete the clip boundary of the reference file. Also make sure to use the Fit View. If you are changing the Z value of the reference then you are in a 3d file. If view depths are set up it is possible the elements are beyond the view plane, essentially behind your view point. Fit View should bring them into view.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
This might be a silly question but is the sheet file name the same as the file name you are attaching?