Connect edition update 12 version 10.12.00.40
Are their any setting for level display for an alternate of double click for current level and single click to turn a level off? Seams I am always fighting this activating a level instead of turning it off and have to go hunt for the level I want current. This is compounded by the fact our organization loads 2034 layers for every drawing. I would much rather prefer a button I could click on to turn a layer on and off and make current.
If you are searching through 2034 levels you may want to consider adding level filters. One that I use all the time is to show only used levels.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
Hate those damn Autocrap files that come with hundreds of levels. Level Filters is a great idea, I usually open the things and purge all the unused levels.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley