[U17] display rule patterning for forward view

Hi,

I've just got a couple of questions regarding display rule patterning. 

1 - Can it be used for forward view? It works well for cut view, and can be used for back view. 

2 - Is there any way to set patterning cell horizontal and vertical distance? 

Best regards,

Tuan Le

Parents
  • Thanks for providing the example design file. Looking at the Forward section it did not appear to cross the Slab element that you've drawn. When you create a section like this you always need to ensure that it actually cuts through the element that you want to section (see attached screen captures and new DGN file).

    0118.patterning.dgn

    Forward Section Not Crossing Slab

    Forward Section Moved So It Is Crossing The Slab

    Once This Crosses The Slab You Can See The Cross Hatch Display

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Reply
  • Thanks for providing the example design file. Looking at the Forward section it did not appear to cross the Slab element that you've drawn. When you create a section like this you always need to ensure that it actually cuts through the element that you want to section (see attached screen captures and new DGN file).

    0118.patterning.dgn

    Forward Section Not Crossing Slab

    Forward Section Moved So It Is Crossing The Slab

    Once This Crosses The Slab You Can See The Cross Hatch Display

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Children