MULTILINE WITH "TEXT" LINE STYLE

Hi Everyone, I have created a custom line style which is composed of dash and text. 

(see below photo)

I am using this line style in making multi-line which represents a cable trough in my layout, my problem is, this line style does not break in every corners of the multiline and the text will come out of the way and it does not look good. it looks like this (refer to photo below.)

How can I make the center "text" line breaks in every corner? 

Thank you. 

Parents
  • Text will not break around corners. If you are using a custom line style the part of the style that is the text is essentially a cell. The best solution for you is to draw the custom line style between 2 points where the test will fit properly. I other sections draw a solid line. Not the best solution but it's all you are able to do for a workaround.

    Microstation CONNECT - 10.17.2.61

    ORD - 2021 R1 10.10.1.3

    ORD 2022 R1.1 - 10.11.3.2

    ORD 2022 R3 -  10.12.2.4

    Microstation v8i SS 10 - 08.11.09.919

    Power InRoads v8i - 08.11.09.615

    ProjectWise - 10.0.3.453

Reply
  • Text will not break around corners. If you are using a custom line style the part of the style that is the text is essentially a cell. The best solution for you is to draw the custom line style between 2 points where the test will fit properly. I other sections draw a solid line. Not the best solution but it's all you are able to do for a workaround.

    Microstation CONNECT - 10.17.2.61

    ORD - 2021 R1 10.10.1.3

    ORD 2022 R1.1 - 10.11.3.2

    ORD 2022 R3 -  10.12.2.4

    Microstation v8i SS 10 - 08.11.09.919

    Power InRoads v8i - 08.11.09.615

    ProjectWise - 10.0.3.453

Children
No Data