Can I searche for an text location in design file?

Hi all

Thank you Jon, but I needed only to read your link site where I found that there is an text searh in Microstation already.

I suspected that but didn´t find it first. Here is how to search for text search/replace in microstation:

And this text search is also searching in reference file text exactly what i needed.

Best Regards

Tom

Tom said:

And this text search

the native find text in microstation only  finds them one at a time  if your  not replacing them, but jons  tool puts them all in  a selection set  so presumabley  you could find them all in one go then change the angle via the  properties in one  shot .. the native tool  is one at a time to change the  properities of the rotation..

Tom said:

And this text search

the native find text in microstation only  finds them one at a time  if your  not replacing them, but jons  tool puts them all in  a selection set  so presumabley  you could find them all in one go then change the angle via the  properties in one  shot .. the native tool  is one at a time to change the  properities of the rotation..